stainless bits
+5
littlemoon
Snails
Thackers
Admin
daz.h
9 posters
Page 1 of 2
Page 1 of 2 • 1, 2
stainless bits
just had a few more parts (only 30 of each) laser cut.
these are stand brackets, tie bar (vega cometa only), and rear hub locking rings.
all parts are perfect fit, and won't rust £4 each
still got a few other vega /lui stainless bits left, but no engine mount bolts or wheel spindles, i am getting more made, but wont be done untill the new year.
these are stand brackets, tie bar (vega cometa only), and rear hub locking rings.
all parts are perfect fit, and won't rust £4 each
still got a few other vega /lui stainless bits left, but no engine mount bolts or wheel spindles, i am getting more made, but wont be done untill the new year.
daz.h- Posts : 869
Join date : 2010-06-27
Age : 55
Location : york
Re: stainless bits
I can say the parts i have had from Daz really are top quality and perfect fit, the lock plate is the best i've seen. Top marks that man
Thackers- Posts : 831
Join date : 2010-06-26
Age : 61
Location : No 20 on Moonage Daydream Harrogate n.yorks
Re: stainless bits
cheers thackersThackers wrote:I can say the parts i have had from Daz really are top quality and perfect fit, the lock plate is the best i've seen. Top marks that man
the prices i will put on here are for the club only, i will be putting some onto ebay but at a higher price.
daz.h- Posts : 869
Join date : 2010-06-27
Age : 55
Location : york
Re: stainless bits
Daz I think I need stand brackets and a tie bar for my bitza but need to cross check my parts spreadsheet first
Snails- Posts : 968
Join date : 2010-06-28
Age : 53
Location : Luna Base Alpha
Re: stainless bits
no problem snails, i can send them all together.
they can be polished to a realy high sheen, (by you, not by me )or if you wish can be left a matt finish.
they can be polished to a realy high sheen, (by you, not by me )or if you wish can be left a matt finish.
daz.h- Posts : 869
Join date : 2010-06-27
Age : 55
Location : york
Re: stainless bits
I could also probably do with a full list of what will be for sale as would like to save on postage.
Snails- Posts : 968
Join date : 2010-06-28
Age : 53
Location : Luna Base Alpha
stainless
top quality stuff ,put me down for another set
littlemoon- Posts : 162
Join date : 2010-07-05
Age : 52
Location : east yorks tha know's
Re: stainless bits
price to luna owners on here is £4 each, plus postage probably around 70p, depending how many you buy of course
you can pay by paypal, but it must be sent as a gift. my paypal address is vegadaz@tiscali.co.uk
here is a picture of what they can be polished up to, they will come with a matt stainless finish.
the tie bar will not fit lui machines.
you can pay by paypal, but it must be sent as a gift. my paypal address is vegadaz@tiscali.co.uk
here is a picture of what they can be polished up to, they will come with a matt stainless finish.
the tie bar will not fit lui machines.
daz.h- Posts : 869
Join date : 2010-06-27
Age : 55
Location : york
stainless bits
Just Received my stainless bits from Daz - cheers mate well pleased - let me know when the other bits are done- will have some of each type
Bingo
Bingo
Bingo- Posts : 7
Join date : 2011-02-07
Re: stainless bits
glad your happy with them bingo.
i will let you and the others know when the other stainless parts are completed.
daz
i will let you and the others know when the other stainless parts are completed.
daz
daz.h- Posts : 869
Join date : 2010-06-27
Age : 55
Location : york
stainless bits
Bet some stainless crashbars would sell well Daz
gc- Posts : 92
Join date : 2011-02-19
Location : Darlington
Re: stainless bits
you might get scootopia interested, i sent them a rear rack a few years ago (spare wheel type) and they remade them, but i was surprised that they were in normal steel rather than stainless.gc wrote:Bet some stainless crashbars would sell well Daz
worth a call, but there not for me .
daz.h- Posts : 869
Join date : 2010-06-27
Age : 55
Location : york
Re: stainless bits
i do also have a rear back rest, there probably easier to remake in stainless, still ugly though.
daz.h- Posts : 869
Join date : 2010-06-27
Age : 55
Location : york
Re: stainless bits
I would really like a backrest. I know Coxy had one for years knocking about with a blue tartan pad...wish I'd bought it now !
merton mick- Posts : 6
Join date : 2011-02-06
Age : 53
Location : Taunton
Re: stainless bits
mines got the blue tartan pad, someone must of thought it looked cool at some timemerton mick wrote:I would really like a backrest. I know Coxy had one for years knocking about with a blue tartan pad...wish I'd bought it now !
daz.h- Posts : 869
Join date : 2010-06-27
Age : 55
Location : york
Re: stainless bits
finally after what seems like an eternity, the other vega stainless parts are ready
engine mount spindle with distance pice and two nuts.
front hub spindle drilled for damper studs comes with damper studs,3 distance pices,2 inner nuts and 2 outer (shouldered) nuts
brake and clutch lever pivot pins.
engine side casing stud kit inc the 2 long studs.
rear shock distance piece (still waiting for nut)
rear hub nuts.
still waiting on
cable adjusters (set of 3)
gear change swivel bolt (on top of casing)
fork link bolts.
engine mount spindle with distance pice and two nuts.
front hub spindle drilled for damper studs comes with damper studs,3 distance pices,2 inner nuts and 2 outer (shouldered) nuts
brake and clutch lever pivot pins.
engine side casing stud kit inc the 2 long studs.
rear shock distance piece (still waiting for nut)
rear hub nuts.
still waiting on
cable adjusters (set of 3)
gear change swivel bolt (on top of casing)
fork link bolts.
daz.h- Posts : 869
Join date : 2010-06-27
Age : 55
Location : york
Re: stainless bits
Admin wrote:Now then young man - is it you with all the stainless bits on E-Bay?
yes thats me.
if anyone wants anything contact me through here and i will sort out a discount for luna owners.
here is a link to my ebay page.
http://shop.ebay.co.uk/daz.h/m.html?_trksid=p4340.l2562
daz.h- Posts : 869
Join date : 2010-06-27
Age : 55
Location : york
Re: stainless bits
pete, cheers for that.
let me know exactly what you need and i will sort out a great deal for you.
daz
let me know exactly what you need and i will sort out a great deal for you.
daz
daz.h- Posts : 869
Join date : 2010-06-27
Age : 55
Location : york
Stainless Bits
Hi Daz
My front wheel spindle, hub nut and cable adjusters have just arrived, well pleased - nice quality and bargain price .
Cheers
Andy (Bingo)
My front wheel spindle, hub nut and cable adjusters have just arrived, well pleased - nice quality and bargain price .
Cheers
Andy (Bingo)
Bingo- Posts : 7
Join date : 2011-02-07
like your bits
can you PM me when they are in stock again - there's nothing showing on your ebay.
cheers,
cheers,
littlewilly- Posts : 59
Join date : 2012-03-11
Age : 71
Page 1 of 2 • 1, 2
Page 1 of 2
Permissions in this forum:
You cannot reply to topics in this forum
|
|