CHISELSPEED VEGA RACER
+3
Weeks
gc
NIGE
7 posters
Page 1 of 1
CHISELSPEED VEGA RACER
[img][/img]
Well half of it anyway.....
"message from Mrs Nige"
I have now wasted well over an hour trying to download a picture that is not cut in half........ please someone help me..... why isn't it as simple as downloading a picture onto Facebook!!!!!!!!!!!
Well half of it anyway.....
"message from Mrs Nige"
I have now wasted well over an hour trying to download a picture that is not cut in half........ please someone help me..... why isn't it as simple as downloading a picture onto Facebook!!!!!!!!!!!
NIGE- Posts : 190
Join date : 2011-12-20
Location : Ratby, Leicester
chiselspeed vega racer
Don't forget to wear fire-proof trousers Nige as they are a must with those pipes
gc- Posts : 92
Join date : 2011-02-19
Location : Darlington
Re: CHISELSPEED VEGA RACER
Nige, who do you use as a photo host? if it's Photobucket i might be able to help.
Tasty looking machine there
Thackers- Posts : 831
Join date : 2010-06-26
Age : 61
Location : No 20 on Moonage Daydream Harrogate n.yorks
Re: CHISELSPEED VEGA RACER
That looks good!! whats the engine spec??
disco- Posts : 25
Join date : 2012-06-17
Re: CHISELSPEED VEGA RACER
I WILL GET LEG PROTECTION.I USED TO BE A FIREFIGHTER AND I CAN SEE THIS THING BURNING ME AND I NEVER GOT BURNT WHEN I WAS IN THE BRIGADE .THACKERS IT IS PHOTO BUCKET .CHEERS. HI DISCO. GENUINE YAMAHA PISTON PORTED PISTON 132CC .CHISELSPEED STAGE 4 .MB SMALL BLOCK MANIFOLD MATCHED UP PROPERLY 25MM DELLY .CHISELSPEED ADS EXHAUST STARSTREAM GEARBOX
NIGE- Posts : 190
Join date : 2011-12-20
Location : Ratby, Leicester
Re: CHISELSPEED VEGA RACER
Hi Nige, once you have uploaded your pics into a album put your computer curser (pointer) over the pic, a box will appear. You tick the box and go to the bottom of the page, there in blue you will see "choose action" click on that then click " generate link codes for selected" on the page that comes up you want the section IMG for bulletin boards and forums right click on the full size box then on your Luna page left click, then right click on "paste" in the drop down box. To check the picture link has worked click on the green prieview button, and if all's well send.
Now if you only get half the picture on here you may have your camera set with too much "detail" on it and the site cant process all the information in the photo, then you have to re-size your photo back at photobucket or turn the camera picture resolution down (too many pixels) or another way is to use "clickable thumbnails" back at the IMG for bulletin boards and forums I hope this might help
Now if you only get half the picture on here you may have your camera set with too much "detail" on it and the site cant process all the information in the photo, then you have to re-size your photo back at photobucket or turn the camera picture resolution down (too many pixels) or another way is to use "clickable thumbnails" back at the IMG for bulletin boards and forums I hope this might help
Thackers- Posts : 831
Join date : 2010-06-26
Age : 61
Location : No 20 on Moonage Daydream Harrogate n.yorks
Re: CHISELSPEED VEGA RACER
brilliant thackers thank you can not wait to ride it still got few things to do though .i have still got to get a seat made yet but nearly there
NIGE- Posts : 190
Join date : 2011-12-20
Location : Ratby, Leicester
Re: CHISELSPEED VEGA RACER
looks great that nige, you must be very proud
daz.h- Posts : 869
Join date : 2010-06-27
Age : 55
Location : york
Re: CHISELSPEED VEGA RACER
Lovely looking scoot Nige, you got a shot from the front?
Snails- Posts : 968
Join date : 2010-06-28
Age : 53
Location : Luna Base Alpha
Re: CHISELSPEED VEGA RACER
Nige, tell me more about the piston please. Was it from Chiss or somewhere else and how much was it? I ask as need a piston for my 2nd barrel when i get round to the Reed Valve cov and i dont want to deal with the fella who sells on ebay. Ive looked on the net for a TZR 150 piston but cant no satisfaction man
I also see that Scoot RS are making a copy of the LTH reed now
I also see that Scoot RS are making a copy of the LTH reed now
Thackers- Posts : 831
Join date : 2010-06-26
Age : 61
Location : No 20 on Moonage Daydream Harrogate n.yorks
Re: CHISELSPEED VEGA RACER
mr chiss supplied it .its not cheap .about 100 quid.the rings are about 38 quid to replace.i was very very careful putting them on .nice piston though .
NIGE- Posts : 190
Join date : 2011-12-20
Location : Ratby, Leicester
Re: CHISELSPEED VEGA RACER
Holly shit you will be running that in carefully then. It has to go on a dyno when pistons are that price.
Why oh why do parts for these machines cost so much????????????????????
I have one more place to try for a piston then i'll have to swallow my pride and go the ebay seller. I think my reed valve conversion has just taken a few more years on a back burner. Damn i hate this ressesion/hard time
Nige next time you start it up take some video and put it on the tube, i'd love to hear it.
Why oh why do parts for these machines cost so much????????????????????
I have one more place to try for a piston then i'll have to swallow my pride and go the ebay seller. I think my reed valve conversion has just taken a few more years on a back burner. Damn i hate this ressesion/hard time
Nige next time you start it up take some video and put it on the tube, i'd love to hear it.
Thackers- Posts : 831
Join date : 2010-06-26
Age : 61
Location : No 20 on Moonage Daydream Harrogate n.yorks
Re: CHISELSPEED VEGA RACER
i will try .you can have my ebay piston if you want .i have lost a c clip though how about 20 quid .bargain
NIGE- Posts : 190
Join date : 2011-12-20
Location : Ratby, Leicester
Re: CHISELSPEED VEGA RACER
Nice one Nige, i'll take it. P.M me as to how to get you the money. My reed conversion has just taken a big step forwardNIGE wrote:i will try .you can have my ebay piston if you want .i have lost a c clip though how about 20 quid .bargain
Thackers- Posts : 831
Join date : 2010-06-26
Age : 61
Location : No 20 on Moonage Daydream Harrogate n.yorks
Re: CHISELSPEED VEGA RACER
Hi Nige, the piston arrived today, thanks mate . Any update with your machine ?
Thackers- Posts : 831
Join date : 2010-06-26
Age : 61
Location : No 20 on Moonage Daydream Harrogate n.yorks
Re: CHISELSPEED VEGA RACER
thats good.i have been sorting cables.to be honest to busy with work at mo .i will try and get back on it asap though.when are you starting your reed valve mods .is mick abbey doing it for you
NIGE- Posts : 190
Join date : 2011-12-20
Location : Ratby, Leicester
Re: CHISELSPEED VEGA RACER
Yes i will bw asking Mick to do the work, last time we spoke , which was some time ago he wanted to make me a exhaust system to make the engine work better. I had to curb his enthusiasm a bit, he thought a reed valve would be slightly better than the set up i have now. As to when it will all take place???????? that's still the big question, i will have to take a trip to A.F's for the rebore first (they will do it there and then if you catch them right) then onto Mick and then back to scooterotica for the dyno, which all could = a long time
Thackers- Posts : 831
Join date : 2010-06-26
Age : 61
Location : No 20 on Moonage Daydream Harrogate n.yorks
Re: CHISELSPEED VEGA RACER
Well what do you know.........the barrel has come another step forward i decieded to take a trip to A.F's and got the re-bore after earlier posting. £15 done while i waited bargain as to the next step in the process that's anybody's guess
Thackers- Posts : 831
Join date : 2010-06-26
Age : 61
Location : No 20 on Moonage Daydream Harrogate n.yorks
Re: CHISELSPEED VEGA RACER
FLIPPIN HECK
NIGE- Posts : 190
Join date : 2011-12-20
Location : Ratby, Leicester
Similar topics
» CHISELSPEED VEGA RACER
» VEGA RACER 2
» Chiselspeed Vega pipe
» chiselspeed
» W/ Vega atomiser (I will buy a whole Vega carburettor as well)
» VEGA RACER 2
» Chiselspeed Vega pipe
» chiselspeed
» W/ Vega atomiser (I will buy a whole Vega carburettor as well)
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|