Parts search
2 posters
Page 1 of 1
Parts search
After promising myself for a long time now, I have finally started restoring a 1968 Lui / Luna (not sure which) a 50 cl
I haven't started looking at the engine yet (thats for later) but I have had it everything else shot blasted ready for painting. I would like to replace all the rubbers, bearings and springs in the forks and front hub and I need a new front strut for the frame along with a few other bits and pieces.
I'm Midlands based (Nuneaton way) and would like to know the best suppliers for these parts. Along with any advise that you think would be helpfull.
Many thanks
Cakey
I haven't started looking at the engine yet (thats for later) but I have had it everything else shot blasted ready for painting. I would like to replace all the rubbers, bearings and springs in the forks and front hub and I need a new front strut for the frame along with a few other bits and pieces.
I'm Midlands based (Nuneaton way) and would like to know the best suppliers for these parts. Along with any advise that you think would be helpfull.
Many thanks
Cakey
cakey150- Posts : 13
Join date : 2010-09-29
Age : 55
Location : Near Nuneaton
Re: Parts search
Hi Cakey for your parts quest you could start checking out the dealers Pete listed here
https://lunaownersclub.forumotion.com/t120-parts-availability
It's also worth keeping an eye on ebay too, other than that stick a wanted ad on here you might get lucky, i'd be prepared for a shock or two price wise though.
https://lunaownersclub.forumotion.com/t120-parts-availability
It's also worth keeping an eye on ebay too, other than that stick a wanted ad on here you might get lucky, i'd be prepared for a shock or two price wise though.
Thackers- Posts : 831
Join date : 2010-06-26
Age : 61
Location : No 20 on Moonage Daydream Harrogate n.yorks
Similar topics
» FS: Breaking Vega and Cometa
» j125 / tzr 150/ reed valve
» Parts Seller In Stoke
» It might be a difficult one
» Parts avertised
» j125 / tzr 150/ reed valve
» Parts Seller In Stoke
» It might be a difficult one
» Parts avertised
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|